APsystems ECU-R - Ethernet Network Connection

APsystems ECU-R Installation/User Manual
16
4. ECU-R User Interface
4.7.2 LAN
 Make sure the LAN cable is connected to the network port on the
back of the ECU-R.

Connect the LAN cable to a spare port on the broadband router.
 ECU’s wired network setting has 2 options:
 automatically obtain an IP address: the router will give an IP address
to the ECU-R automatically (preferred method) .
 use a fixed IP address. In that case, you need to enter enter IP
address, subnet mask, default gateway, Preferred DNS server and
Alternate DNS server.

Once the LAN connection has been established, you can check the
internet connection on the home page of the ECU APP:

The first bullet (with ECU UID) is green when the
smartphone/tablet is properly connected to the ECU hotspot.
 The 2nd bullet shall be green if the internet connection to the router
has been successfully established.