APsystems ECU-R - Automatic System Check

APsystems ECU-R Installation/User Manual
20
4. ECU-R User Interface
4.12 Automatic System Check
 Once the ECU has been commissioned, the menu “Automatic
System Check” can help you to check proper communication and
production of each microinveter.
 This menu also gives some basic troubleshooting tips.
4.13 ECU AP Settings

This menu can be used if you would like to change the default
password of the ECU-R hotspot.
 Please connect to the ECU hostpot first, open the menu “ECU APP
settings” and change the password at your convenience.

If doing a reset of the ECU, password will be reinitialized as
88888888.