APsystems ECU-R - Technical Specifications

APsystems ECU-R Installation/User Manual
22
5. Technical Data
(*): Maximum number of microinverters per ECU may vary depending on the PV array size and
layout, maximum distance between ECU and microinverters in the array, obstacles (thick concrete
wall, metallic roof top).
Specifications subject to change without notice.
Please ensure you are using the most recent update found at www.APsystems.com.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
This Class B digital apparatus complies with Canadian ICES-003.
Communication Interface
Integrated Wi-Fi
802.11g/n
Communication
ZigBee 2.4 GHz
Ethernet
10/100M Auto-sensing, Auto-negotiation
Wireless security
WEP,WPA2-PSK
USB Port (North America ONLY)
4G cellular communication (external
APsystems dongle needed)
Power Requirements
AC Adapter
5V, 2A
Power Consumption
1.7W
Maximum Communicating Inverter
Qty(*)
100
Mechanical Data
Dimensions (W
×
H
×
D)
122mm
×
87mm
×
25mm (4.8”
×
3.4”
×
0.98”)
Weight
150g (0.33lbs)
Ambient Temperature Range
-20°C to +65°C (-4℉ to +149℉)
Cooling
Nature Convection; No Fans
Enclosure Environmental Rating
Indoor - NEMA 1 (IP20)
Features
Compliance
IEC 60950-1, EN60950-1, IEC 60529, EN
60529, ANSI/UL 60950-1,
CAN/CSA C22.2 No.60950-1, UL50E, FCC
part 15, EN61000-6-1,
EN61000-6-3, ICES-003, AS NZS 60950-1,
GB/T17799
2021/08/25 REV7.0