APsystems QT2 - Page 4

4
2022/08/19 Rev 3.0 Quick Installation Guide
Step 8. Complete the APsystems installation map
a. Each APsystems Microinverter has 2 removable serial number labels.
b. Complete installation map by sticking ID label of each microinverter at the right location.
c. The second serial number label, could be stuck on the solar module frame, which could help
later to confirm the position of the microinverter without dismantling the PV module.
NOTE:
. The layout of the microinverters’
serial numbers installation map is only suitable for
typical Installation.
. Installation Map is available in the last page appendix of this manual.
.
Use ECU_APP (available in the EMA Manager) to scan the serial numbers on the map
when setting up the E
CU (see ECU instruction manual for more info)
.
Produce: information is subject to change without notice. (Please download manuals at www.APsystems.com).