APT 8520 Quick Start Guide

6 call +1-877-322-7693
4. The File screen will be displayed and the selections on the menu bar will change. The menu bar of the
File menu will display the selections to Add, Edit, or Load a test file. The Next selection on the menu
bar will not do anything. To start adding a test file press the number 1 key on the keypad to select Add.
5. The next screen will display a field with a blinking cursor to enter a name for the file. Use the keypad
to enter a name for the test file (23 character limit).
6. After entering the file name press the ENTER key on the keypad to save the file name and display
the test parameters for editing. The test parameters can be edited using a combination of the rotary
knob and keypad. To edit a test parameter, use the rotary knob to highlight the parameter then press
the rotary knob to edit the parameter. Use the rotary knob or keypad to edit the test parameter value.
The available range or settings for the test parameter being edited will be displayed at the bottom of
the screen. Once the desired value of the test parameter is entered press the rotary knob or the ENTER
key on the keypad to save the value and move to the next test parameter.
© 2022 Associated Power Technologies

APT 8520 Specifications

General

Brand	APT
Model	8520
Category	AC Power Distribution
Language	English