Need help?Do you have a question about the APT 8512 and is the answer not in the manual?
General| Input Voltage | 208/240 VAC |
|---|---|
| Output Voltage | 208/240 VAC |
| Number of Outlets | 12 |
| Amperage | 50A |
| Cord Length | 10 ft |
| Input Frequency | 50/60 Hz |
| Output Frequency | 50/60 Hz |
| Humidity | 5 to 95% RH, non-condensing |
Details warranty terms, repair conditions, and actions that void the warranty.
Explains product marking symbols and caution indicators.
Provides essential safety guidelines for operating and handling the instrument.
Detailed technical specifications for all models, including output, frequency, and protection.
Explains selecting output modes and managing test files (Manual, List, Step, Pulse).
Lists and explains error messages, their causes, and clearing procedures.
Introduces SCPI language structure, syntax, and command examples.
Outlines SCPI commands for Output, Measure, Mode, and System subsystems.
Provides sample commands for basic control and queries with execution time.
Step-by-step guide for calibrating low-range voltage settings.
Step-by-step guide for calibrating high-range voltage settings.
Step-by-step guide for calibrating current settings.
To Next Page
