THE ACCESSORIESOptional
WATER CASCADE (Standard and LED Light)
The water cascade mechanism is essentially the same and installs
just as easily whether you have opted for the standard model or the
LED light model, both of which are available as an option.
All you need to do is integrate them into a rock or wall
sufficiently close to the pool and strictly follow the
recommendations in the spa installation document to ensure
thatALL the water from the waterfall returns to the pool, thus
preventing premature loss of water from your spa.
Waterfall system
LED light
The light cascade system must have access on the sides to
possibly change the light strip located inside the system.
To activate the water cascade, you just need to turn the
valve, generally red or blue in color.
located near the waterfall.
Waterfall system
standard
Waterfall mechanisms should NEVER be left operating
during the winter period due to the risk of freezing.
Refer to the Shutdown Procedures chapter for the steps
to follow to winterize the waterfall system.
NEVER leave the waterfall running during the winter or
when the cover is installed on the spa.
Waterfall valve
SEALING CAPS (Closing the spa)
Sealing caps must be used if the spa is not used during the
cold period. They will be placed in position in place of the
jets during the spa closing procedures. Refer to the chapter
on closing procedures to find out the steps to follow to
close the spa.
Sealing cap
SPA SWEEPERS
There are different types of spa sweepers. Some use batteries
while others are simply manual action. Each vary in price and
effectiveness. Ask your retailer to find out the ranges
available.
11
Spa sweepers
To Next Page
Loading...