THE ACCESSORIESOptional
handles to open and
remove the lid
Blood
security
open it
RIGID COVER
The rigid folding cover in three detachable parts is equipped with
quick-release straps which must be attached to the exterior
edges of the spa using screws or concrete glue. A small plastic
part is provided with this clip to lock the strap.
The cover protects your spa against loss (or increase) of
temperature as well as debris that may enter it.
It
is also mandatory to put it on at all times when the spa is not in use in
order to avoid the risk of drowning or it being moved by the action of
the wind. .
COVER MAINTENANCE
Clean the leatherette of the lid cover only with a damp cloth. It
is advisable to take the styrofoams out of the cover from time
to time to let them dry.
All styrofoams absorb water more or less quickly. It is normal for
them to
become heavy and this will be a sign that you need to
take them out and dry them or simply change them. Open the
zippers of the vinyl cover and take out the styrofoams to air dry
regularly. The covers are subject to frequent handling and great
pressure; it is therefore possible to have to replace them
regularly.
Scratch
Always use the handles to handle the cover as this may
cause scratches, tears and damage to the seams. These
breakages are not covered by the cover manufacturer's
warranty.
Tear
Tear
SOFT CANVAS
Some stores sell flexible solar shades to limit water
evaporation.
It is imperative to keep in mind that these should never be
considered secure. If you want to use a flexible canvas without
adding the rigid cover, you must then enclose your entire spa in
order to completely block access, like a swimming pool.
LEAF NETS
Several types of nets can be used over the spa to
prevent leaves or other twigs from getting in,
depending on the size of the mesh of the nets.
Leaf net
10
To Next Page
Loading...