Aquacal AutoPilot PoolSync User Manual

Owner's / Installation Manual
INSTALLER: This document is the Purchaser's property and is to remain with the
equipment owner.
LTP0160 REV 2.0
Important!
This manual covers the installation and operation of the PoolSync
TM
device.
Read this manual and product labels before installing or operating this equipment.

Aquacal AutoPilot PoolSync Specifications

General

Brand	Aquacal
Model	AutoPilot PoolSync
Category	Controller
Language	English

Summary

Safety Information

Important Safety Instructions

Covers crucial safety warnings and guidelines for installation and operation of the PoolSync™ device.

Safety Signals

Explains the meaning of warning and caution symbols used throughout the manual for hazard identification.

Control Panel Overview

Installation - Wiring

Wiring to a PoolSync™ Ready Device

Outlines the general process for connecting the device to compatible pool equipment.

ChlorSync® Wiring

Provides specific wiring instructions for connecting the PoolSync™ to a ChlorSync® unit.

AquaCal® Heat Pump Wiring

Offers detailed steps for wiring the PoolSync™ to an AquaCal® heat pump.

ChlorSync® and AquaCal® Heat Pump Combination

Instructions for wiring the PoolSync™ to control both devices simultaneously.

Connect the PoolSync™™ to an AquaCal® heater

App and Connectivity Setup

Troubleshooting

Cannot See PoolSync™™ Device In Mobile App

Lights Are Not Illuminated On The PoolSync™™ Unit

LAN LED Fading Slowly

Old PoolSync™™ Still Showing In My App