What to do if my Aquatight Heat Pump does not run?
If your Aquatight Heat Pump isn't running, first, check the manual power supply switch to ensure it is on. Also, verify if a fuse has burned. Check if the machine's auto-protector has started by reviewing the failure code display on the controller. Finally, check whether the machine's automatic on or off setting was enabled.
Why is my Aquatight PH20V running but not heating or cooling?
If your Aquatight Heat Pump is running but not heating or cooling, check for any blockages on the air inlet and outlet of the unit.
How to fix automatic start and stop of Aquatight Heat Pump?
If your Aquatight Heat Pump is starting or stopping automatically, check whether there is a malfunction on the timer.
Why is my Aquatight Heat Pump emitting white vaporous cold air or water?
The fan motor may stop automatically for defrost. Also, there will be sound from the solenoid valve when the machine starts or ends defrosting. During operation or just after stopping, a water flow sound might be heard for 2-3 minutes, which comes from refrigerant flowing or water drainage during dehumidification. The plopping sound during operation is caused by the expansion and contraction of the heat exchanger when the temperature varies.
What to do if my Aquatight PH20V Heat Pump shows low water pressure protection?
If your Aquatight Heat Pump indicates low water pressure protection, check if water flows through the machine and ensure the pump is on. If problems persist, contact your dealer.
What to do for single phase failure connection on Aquatight PH20V Heat Pump?
Contact your dealer.
How to troubleshoot a swimming pool heat pump sensor failure in Aquatight?
Contact your dealer.
What to do if my Aquatight PH20V has an exhaust sensor failure?
Contact your dealer.
How do I fix a coil pipe sensor failure on my Aquatight PH20V Heat Pump?
Contact your dealer.
Why does my Aquatight PH20V auto stop when the air temperature is ?0??
The machine's auto-protection feature is activated.
Safety warnings and precautions for electrical shock and handling the unit.
Highlights safeguards, error codes, and operational protections like water flow and pressure switches.
Guidelines for safely transporting the swimming pool heat pump unit.
Factors to consider for selecting the best location for the heat pump.
Details on connecting the water pipes for the heat pump system.
Instructions for electrical wiring, grounding, and protection for the heat pump.
Steps to perform after the initial installation and power connection, including inspections and initial startup.
Explanation of the LED controller interface, buttons, and display functions.
Instructions for setting heat/cool mode, water temperature, and local time.
How to set the machine to work or stop automatically at specified times.
Guidelines for cleaning, seasonal storage, and regular checks of the heat pump.
List of common problems, their phenomena, and possible reasons.
Table listing failure codes, their descriptions, and recommended actions.
To Next Page
General