Aquatight PH20V - Parameters of Product Range

Specification of Vertical Type
Model
PH20V PHC30V PHC45V PHC60V PHC60Vs PHC75Vs
Heating capacity KW
(air 26℃,water 26℃)
9 12 16 23 23 30
C.O.P.
(air 26℃,water 26℃)
≥6.0
≥6.0 ≥6.0 ≥6.0 ≥6.0 ≥6.0
Heating capacity KW
(air 15℃,water 26℃)
6.3
8.5 11 16 16 21
C.O.P.
(air 15℃,water 26℃)
≥4.5
≥4.5 ≥4.5 ≥4.5 ≥4.5 ≥4.5
Cooling Capacity KW
(air 35℃, water 28℃)
\ 7.5 9.5 14 14 18
C.O.P.
(air 35℃, water 28℃)
\ ≥3.8 ≥3.8 ≥3.8 ≥3.8 ≥3.8
Rated power/ Max
power Kw
1.4/1.8
1.8/2.4 2.4/3.1 3.8/5.6 3.8/5.6 4.5/6.3
Power supply
220-240V/1Ph/50Hz
380-415V/3Ph/50Hz
Rated current / Max
current A
6.4/8.2
8.2/11 10.9/14.1 17.3/26 5.8/8.5 6.8/9.5
Function
Noise level dB(A) ≤48
≤48 ≤50 ≤56 ≤56 ≤58
Net / Gross weight Kg 55/60
70/75 85/93 107/117 107/117 127/137
Water pipe in-out spec mm 48
48 48 48 48 48
Advised water flux m³/h 4-6
5-7 6.5-8.5 8-10 8-10 10-12
Parameters of product range
*C.O.P: Coefficient of performance
Note:
1. Mode PH~ only have heat function and PHC is heat and cool optional. S refers to 3-phase.
2. This product can work well under air temp +0 ℃ ~43℃. Performance cannot be guaranteed outside the
operating ranges and must take account the exterior conditions of use identified to select suitable mode
(such as location, area of swimming pool, and numbers of swimmer.)
3. Above parameters are subjected to adjustment periodically for technical improvement with further notice.
Please refer to nameplate on each machine for accurate information.
3