ITEM NO. FITS AQUARIUMS PAR* LUMENS*
15720 18-24" - 10, 15, 20H, 20X, 30X, 16 Bow, 26 Bow 13 750
15721
30-36" - 20L, 29, 30, 30BR, 36 Bow, 37, 38,
40BR, 45, 46 Bow, 50, 54 Corner, 65
15 850
15722 48-54" - 33L, 40L, 55, 72 Bow, 75, 90, 120 18 1125
*Average output @ 12"
1. Position the fixture over aquarium by adjusting the
legs (Fig 1) to the proper length so they securely
hold the fixture in place. Always center the fixture
so that it provides maximum exposure of light to all
aquarium inhabitants.
2. Connect the transformer to the connector on the
side of the light fixture.
3. Plug the transformer into an acceptable outlet.
Be sure to incorporate a “drip loop” to prevent water
droplets from running down the cord and into the
outlet should any water get onto the cord.
4. The light fixture will turn on to a standard setting and
you can program the fixture to your preferred settings
using the included remote. (Initial standard setting is
set to white LED, blue LED and purple RGB.)
Fig 1
FIXTURE INSTALLATION INSTRUCTIONS
• This product is recommended for use
over glass-covered aquariums.
• Aqueon
®
glass covers fit on the inside
lip of the aquarium to prevent seepage
out of the aquarium.
To Next Page
Loading...
