Aquverse Water Cooler User Manual

A6500
Angle stop fitting (size depends on your water source, adaptable fitting
provided in water line kit)
Adjustable crescent wrench
Quick connect (2 sided coupler for poly line, provided in water line kit)
Drill with a 3/8 bit
Safety Glasses (Wear these at all times during installation)
To find the Aquverse warranty please go to www.aquverse.com
Poly Tubing (provided in water line kit)
Water filter
WARNING: This product is intended for indoor use only. Outside temperatures can cause damage to all systems. Please use only inside your home or office.
Phillips head screw driver
For any needed assistance please call 1-866-872-5722
****Warning do not plug water cooler in until water line is in place and dispensing water
through the faucets****
Aquverse Water Cooler Installation and Troubleshooting Instructions
WARNING: YOU MUST OBSERVE ALL LOCAL GOVERNING CODES AND ORDINANCES FOR INSTALLATION, OR THE
WARRANTY WILL BE VOIDED.
If you do not own the property where the unit will be installed, you need to contact the owner and obtain
approval before you install your cooler. If you are not comfortable with the installation procedure it is
recommended to have a professional licensed plumber complete the install for you.
WARNING: Do not use a saddle valve for installation or the warranty will be voided
Items You Need
Very sharp pair of scissors or a very sharp knife to cut tubing
Zip Ties (provided in water line kit)

Aquverse Water Cooler Specifications

General

Temperature Settings	Cold, Hot, Room Temperature
Material	Stainless Steel, Plastic
Safety Features	Child Lock, Overheat Protection
Dispensing Method	Push Button
Power Consumption	500W
Color	White
Filtration	Activated Carbon, Sediment Filter

Summary

Cooler Setup and Assembly

Attaching Water Filter

Steps for securely attaching the water filter to the filter head.

Re-attaching Front Cabinet

Procedure for correctly re-attaching the front cabinet cover.

Water Source Connection

Locate Cold Water Source

Guidance on identifying the appropriate cold water line for connection.

Confirm Water Source Off

Steps to ensure the water supply valve is shut off before installation.

Water Line Installation

Installing Water Line Kit

Detailed instructions for connecting the water line tubing from the source to the cooler.

Filter Preparation and Initial Use

Flushing the Filter

How to flush the filter to remove carbon particles before drinking.

Begin Using Your Cooler

Information on when the cooler is ready for use after setup.

Cooler Troubleshooting Guide

Cooler Not Dispensing Water

Steps to diagnose and resolve issues when no water is dispensed.

Cooler Not Chilled

Steps to address problems with water not being adequately chilled.

Cooler Not Hot

Steps to troubleshoot when the hot water dispenser is not functioning correctly.

Water Leaking

Guide to identify and fix leaks from the water cooler.

Water Cooler Cleaning

Cleaning Your Water Cooler Steps

Step-by-step instructions for cleaning the water cooler's internal parts.

Water Filter Replacement

Replacing Your Water Filter Steps

Instructions for removing and installing a new water filter.