3
1 PRODUCT DESCRIPTION
ARAG manual control units for crop spraying are composed of individual, manual type modular valves.
When installed on crop spraying machines, they ensure regular distribution of pesticides.
This booklet describes all the various parts that may be included in the unit. Some
of these parts may not be included in your unit. Likewise, given the modularity of the
product, some types of parts may not be assembled together but are only alternati-
ves for others.
The illustrations in this booklet are, therefore, provided only as indications. For detai-
led information, please refer to the description of the part in question and not of the
unit in general.
ARAG is not liable for any damage caused directly or indirectly by the type of uids
used for spraying by its control units.
The operator has full liability for the use of these products and therefore must verify
the safety regulations indicated on the package by the manufacturer of the liquid
and must wear suitable protective clothing (gloves, overall, footwear, helmet, etc.) as
required by law.
ARAG is therefore not liable for any damage or injury to persons, animals or things
as a result of the incorrect use of the products employed, without protection or con-
trary to recommendations.
1.1 Intended use
This device is designed to work on agricultural machinery for crop spraying
applications.
The machine is designed and built in compliance with EN ISO 14982 standard
(Electromagnetic compatibility - Forestry and farming machines), harmonized with
2014/30/UE Directive.
To Next Page
