What to do if the display does not switch on ARAG Farm Equipment?
If the display on your ARAG Farm Equipment doesn't turn on, first, ensure there is a power supply by checking the power supply cable connections. If the power is on, check if the computer is OFF and press the ON key.
Why is the displayed speed not precise on my ARAG Farm Equipment?
An imprecise speed display on your ARAG Farm Equipment is often due to an incorrect wheel constant setup. Check the setup of the wheel constant.
What to do if the instantaneous pressure is not displayed on ARAG Farm Equipment?
If the instantaneous pressure isn't showing on your ARAG Farm Equipment, there could be a few reasons. First, check the setup of the pressure sensor. Secondly, ensure that the computer is receiving signals from the pressure sensor. Finally, verify the connections to the pressure sensor, as incorrect installation might be the cause.
General| Display Type | LCD |
|---|---|
| Category | Control Systems |
| Display | LCD |
| Operating Voltage | 12 VDC |
| Housing Material | Plastic |
To Next Page
