araknis AN-310-SW-R-24 Quick Start Guide

17
Araknis Networks 310 Series Layer 2 Managed Network Switches
Quick Start Guide
© 2016 Araknis Networks®
Reboot – Press and hold the RESET button on the back of the
switch for 5 seconds, then release. The switch will power
cycle and the front status lights will flash.
Factory Reset – Press and hold the RESET button for 10-15 seconds until
the status LEDs flash once. The switch will power cycle
and be reset to factory default settings.
Pro Tip: Resetting the Switch
RESET
1 3 5 7
2 4 6 8
Link/Act1 Gbps
9 SFP 10 SFP
Link/Act
1 Gbps
Front Facing Models
Rear Facing Models
48 Port Models
1 Gbps/PoE

araknis AN-310-SW-R-24 Specifications

General

Brand	araknis
Model	AN-310-SW-R-24
Category	Switch
Language	English