1) WORK AREA SAFETY
• Keep work area clean and well lit. Cluttered or dark areas invite accidents.
• Do not operate power tools in explosive atmospheres, such as in the presence
of flammable liquids, gases or dust. Power tools create sparks which may ignite
the dust or fumes.
• Keep children and bystanders away while operating a power tool. Distractions
can cause you to loose control.
Rules for safe operation of electrical equipment 2
The Arbortech Power Chisel is designed and built to meet and exceed
Australian and International Safety Standards.
Use only Arbortech approved or other qualified service centres for the serv-
icing and/or repair of this tool. For further assistance contact Arbortech.
The Arbortech Power Chisel is double insulated to provide the highest pos-
sible operator protection from electric shock. Please observe all necessary
safety precautions to avoid electric shock. Do not operate this tool until you
have read and understood all safety instructions and rules of operation.
Failure to comply with these instructions can result in serious accidents
including fire, electric shock or serious personal injury.
IMPORTANT
INCORRECT USE OF THE POWER CHISEl MAY LEAD TO PREMATURE
WEAR AND/OR DAMAGE. PLEASE READ THESE USER INSTRUCTIONS
CAREFULLY BEFORE USE TO ENSURE CORRECT OPERATION.
GENERAL POWER TOOL SAFETY WARNINGS
WARNING - READ ALL SAFETY WARNINGS AND ALL INSTRUCTIONS
Failure to follow all instructions listed below, may result in electric shock, fire
and/or personal injury.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE.
The term “power tool” in the warnings refers to your mains-operated (corded)
power tool or battery-operated (cordless) power tool.
To Next Page
Loading...