WARNING: Always wear correct safety clothing, including ear, eye and
lung protection.
• When removing bulk wood the Power Chisel should be used with two
hands, Arbortech recommend placing the left hand holding the chisel arm
and the right hand holding the tool body in control of the switch.
(as shown in fig.7 & 8)
OPERATION 8
• Ensure the machine is running
BEFORE contacting the material,
to be worked on.
•
Use a maximum 25
o
angle
when removing wood.
(as shown in fig.7).
Fig.8
Fig.7
25
o
To Next Page
Loading...