EasyManuals Logo

arcelik 9551 DB User Manual

arcelik 9551 DB
21 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
15/EN
Using the oven clock
Maximum time that can be set for end of
cooking is 23 hours 59 minutes.
Program will be cancelled in case of power
failure. You must reprogram the oven.
Switch on fully automatic operation
In this operation mode you can enter the cooking time
after entering the end of cooking time. Oven will
calculate the time to start cooking and it will operate
automatically at the designated time.
1. Make sure that the clock is correct.
2. Put your dish into the oven and close the door.
3. Keep the key (3) pressed.
4. Press (5) or (6) keys to set the end of cooking time.
Press the key with short intervals to increase or
reset the time with increments of 1 minute. If you
keep the key pressed, the minutes will increase
and reset faster.
» AUTO symbol appears on the display.
5. Release the key (3).
6. Keep the key (2) pressed.
7. Press (5) or (6) keys to set the cooking time. Press
the key with short intervals to increase or reset
the time with increments of 1 minute. If you keep
the key pressed, the minutes will increase and
reset faster.
8. Release the key (2).
9. Put your dish into the oven.
10. Select operation mode and temperature.
» The oven will be heated up to the preset
temperature and will maintain this temperature until
the end of the cooking time you selected. The cooking
symbol appears on the display during the cooking
process.
11. Press the key (3) when cooking completes and the
alarm sounds.
12. Turn off the oven with the Temperature knob
and/or Function knob.
13. Press the key (4).
» AUTO symbol on the display disappears.
Switch on semi-automatic operation
In this operation mode, oven starts cooking once you
enter the cooking time.
1. Keep the key (2) pressed.
2. Press (5) or (6) keys to set the cooking time. Press
the key with short intervals to increase or reset
the time with increments of 1 minute. If you keep
the key pressed, the minutes will increase and
reset faster.
» AUTO symbol appears on the display.
3. Release the key (2).
4. Put your dish into the oven.
5. Select operation mode and temperature.
» The oven will be heated up to the preset
temperature and will maintain this temperature until
the end of the cooking time you selected. The cooking
symbol appears on the display during the cooking
process.
6. Press the key (3) when cooking completes and the
alarm sounds.
7. Turn off the oven with the Temperature knob
and/or Function knob.
8. Press the key (4).
» AUTO symbol on the display disappears.
If you press the key (2) while cooking is in
progress, remaining cooking time will be
displayed briefly.
Stopping the cooking
1. Keep the key (2) pressed.
2. Keep the key (5) pressed until "0.00" appears on
the display as the remaining cooking time.
3. Release the key (2).
4. Press the key (4).
» AUTO symbol on the display disappears.
5. Turn off the oven with the Temperature knob
and/or Function knob.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the arcelik 9551 DB and is the answer not in the manual?

arcelik 9551 DB Specifications

General IconGeneral
Brandarcelik
Model9551 DB
CategoryOven
LanguageEnglish