10/EN
Installation and connection
• The product must be installed in accordance with
all local gas and electrical regulations.
Electrical connection
Connect the product to a grounded outlet/line
protected by a fuse of suitable capacity as stated in
the "Technical specifications" table. Have the
grounding installation made by a qualified electrician
while using the product with or without a transformer.
Our company shall not be liable for any damages that
will arise due to using the product without a grounding
installation in accordance with the local regulations.
The product must be connected to the mains
supply only by an authorised and qualified
person. The product's warranty period starts
only after correct installation.
Manufacturer shall not be held responsible for
damages arising from procedures carried out
by unauthorised persons.
The power cable must not be clamped, bent or
trapped or come into contact with hot parts of
the product.
A damaged power cable must be replaced by
an Authorised Service Agent. Otherwise, there
is risk of electric shock, short circuit or fire!
• Connection must comply with national
regulations.
To Next Page
Loading...