Post Mount Mailbox | Model 5100
MOUNTING INSTRUCTIONS
R
CUSTOMERS ARE REQUIRED TO CONTACT THE LOCAL
POST OFFICE BEFORE INSTALLING THE MAILBOX TO
ENSURE ITS CORRECT PLACEMENT AND HEIGHT AT
THE STREET. GENERALLY, MAILBOXES ARE INSTALLED
AT A HEIGHT OF 41–45 INCHES FROM THE ROAD
SURFACE TO EITHER THE INSIDE SURFACE OF THE
MAILBOX THAT THE MAIL IS PLACED ON BY THE
CARRIER OR TO THE LOWEST EDGE OF MAIL ENTRY
(FOR LOCKED MAIL SLOT DESIGNS) AND ARE SET
BACK 6–8 INCHES FROM THE FRONT FACE OF CURB
OR ROAD EDGE TO THE MAILBOX DOOR.
Tools (not included)
One Phillips Screwdriver
One Wrench
- or -
Hardware
Mailbox mounting hardware is included with all new Architectural
Mailboxes posts and 4x4 wood-post adapters. If you are using an
existing post, not made by Architectural Mailboxes, please reference
the mounting hole diameter and pattern in Option 2 to determine
the hardware you will need for installation.
© 2020, Architectural MailboxesRev. E
Questions, Comments, Concerns?
support@architecturalmailboxes.com
www.architecturalmailboxes.com
Find us on social media!
@archmailboxes
Option 2
Identify if your existing post or mounting surface has a matching
hole pattern with the mailbox. If there are no matching hole
patterns, you will need an adapter plate or piece of wood to drill
the mounting holes into. Architectural Mailboxes does not
recommend drilling new holes in the mailbox, as that will expose
untreated metal and void the product warranty. Use the drawing
below for suggested bolt sizes to use with your mailbox.
For use with non-Architectural Mailboxes posts...
Option 1
Align the mailbox mounting holes
with the holes in the mounting plate.
Attach the mailbox to the mounting
plate using the hardware included
with the Architectural Mailboxes
post or adapter.
For use with compatible
Architectural Mailboxes
posts and adapters...
ROAD SURFACE
41” to 45”
6” to 8”
MAIL ENTRY
CURB
4.00”
Fits 5/16" Bolts
10.00”
Need keys? Visit us at...
www.architecturalmailboxes.com/keys
To Next Page
Need help?
General
