Archos Jukebox Jukebox Studio - Troubleshooting Connectivity; Jukebox Not Recognized; USB Connection Issues; Drive Access Problems

- 19 -
Problems Solutions
Jukebox is not recognized :
(Check additional USB Issues
below)
- Connect USB cable to Jukebox first, turn
Jukebox On, then connect USB cable to
computer, in the exact order
- Not enough battery power, try to use the
included ARCHOS DC power adapter.
- Make sure USB driver has been installed.
USB Issues :
- If you are connected through a USB hub, ensure that
the hub is connected and powered on.
- Check that you are not connected to a USB port
repeated through a keyboard.
- Try to connect to the USB port directly without
going through a USB hub.
Can’t Access Jukebox Drive :
- Out of battery power, use ARCHOS DC power
adapter to recharge and to power on unit.