42
0744-609
3. If parallelism is not within specifica-
tions, the parallelism must be cor-
rected by first loosening all the
engine mounting bolts (left side,
front, and right top rear). Then, pry
the front of the engine towards the
MAG-side of the engine compart-
ment. Next tighten the left-side
mounting bolts followed by the front
and right-top rear bolts. Re-check
the parallelism. If still out of specifi-
cation, repeat correction procedure.
GASOLINE — On the 600/1000 cc
models for optimum performance, do not
exceed the recommended 87 octane gaso-
line. Using a higher octane gasoline will
not increase overall performance. On the
800 cc models for optimum performance,
use 91 octane (minimum) gasoline.
To Next Page
Loading...
