Need help?Do you have a question about the Arctic Spas Aurora and is the answer not in the manual?
General| Brand | Arctic Spas |
|---|---|
| Model | Aurora |
| Category | Hot Tub |
| Language | English |
Prolonged immersion in hot water can lead to increased body temperature, causing health risks.
Ensure a structurally sound, level surface and adequate access for equipment and service.
Proper foundation support is crucial for outdoor installations on various surfaces.
Verify deck's maximum load capacity to prevent structural damage.
Place All Weather Pools on a uniformly solid and level surface like a concrete pad.
All electrical work must comply with local codes and be done by a licensed electrician.
Instructions on how to drain water from Custom and Classic series hot tubs.
Specific steps for draining water from the Core Series hot tubs.
Details on removing, cleaning, and installing filter cartridges for different series.
Guidance on cleaning and maintaining spa pillows to extend their lifespan.
Recommended methods for cleaning the spa's acrylic shell surface.
Instructions for cleaning and conditioning both vinyl and weather shield spa covers.
Maintenance advice for cedar and no-maintenance cabinets.
Procedures to prevent freezing damage during periods of non-use in cold weather.
Overview of fundamental water maintenance areas: chemical balance, sanitation, and filtration.
Explains the importance of testing and lists parameters like TA, CH, pH, and Sanitizer.
Tips and guidelines for accurate water testing using reagent kits.
Essential safety guidelines for handling and storing spa chemicals.
Recommendations for managing minerals in tap water to prevent scaling and staining.
Explains TA, its importance as a pH buffer, and how to adjust it.
Details on pH levels, their impact on water quality, and adjustment methods.
Recommended Calcium Hardness levels and warnings about its impact.
Importance of sanitizer, recommended types, and safety precautions.
Step-by-step guide for using a chlorine system for spa sanitization.
Identifies potential causes for cloudy spa water and suggests remedies.
Lists causes for colored spa water, such as dissolved metals or low chlorine.
Explains causes of foaming in spa water, often due to oils and organics.
Discusses causes of scale, typically high calcium and alkalinity levels.
Identifies causes of spa water odor, often related to contaminants and chlorine.
Lists causes of eye/skin irritation, including pH, combined chlorine, and contaminants.
Explains reasons for zero chlorine readings, such as high contaminants or test kit issues.
Addresses issues where the spa does not power on or function, checking the breaker.
Guidance on troubleshooting when the spa fails to reach the set temperature.
Steps to diagnose and resolve issues with low or surging jet pressure.
Instructions for troubleshooting non-functional spa lights.
Explains that automatic heating and filtering are normal operations.
Information on spa draining by gravity and methods for removing residual water.
Information on available resources for technical assistance and videos.
Detailed specifications for various Custom Series spa models, including dimensions and electrical requirements.
Identifies key components and features of the Custom Series spa layout.
Describes different types of jets available in the Custom Series and their functions.
Explains the layout and function of the topside control panel for the Custom Series.
Provides a concise guide to common spa functions and operations for quick access.
Step-by-step instructions for setting up the spa's filtration cycles and frequency.
Lists common error codes displayed on the topside control panel and their meanings.
Guidance on how to perform software updates for the spa's Eco Pak.
Outlines the warranty coverage and terms for various components of the Custom Series.
Details the conditions, exclusions, and disclaimers applicable to the spa warranty.
Details specifications for Classic Series spa models, including dimensions and electrical requirements.
Identifies key components and features within the Classic Series spa layout.
Describes the different types of jets used in the Classic Series spas.
Explains the functions and layout of the topside control panel for Classic Series.
Instructions on how the topside control panel behaves after a power loss.
How to access the spa's settings menu for various adjustments.
Details on controlling the spa's integrated audio system via the topside panel.
Information on turning the topside control keypad on and off.
Overview of the information displayed on the spa's main screen.
How to activate or deactivate spa accessories using the control panel.
How to set and monitor the spa's water temperature using the control panel.
Navigating the settings menu to adjust various spa parameters.
Options for managing spa water care, including Economy and Standard modes.
How to adjust filtration schedules for optimal water management.
Configuration options for the Onzen system, including cycle duration and frequency.
Detailed controls for the spa's audio system, including Bluetooth and sound settings.
How the spa provides reminders for routine maintenance tasks.
How to put the spa into standby mode for servicing.
Steps to connect the spa to a WiFi network for remote control and monitoring.
Specific controls for the in.stream 2 audio system, including playback and volume.
A comprehensive list of error codes displayed on the IN.K500 control panel and their meanings.
Warranty coverage for the spa shell against water loss due to structural failure.
Warranty for the Forever Floor against rotting and structural cracking.
Warranty for electrical components, pumps, heater, and control systems.
Warranty for fuses, lights, jets, topside overlays, and other minor parts.
Warranty for the shell surface against water loss due to material failure.
Warranty coverage for the spa cover against malfunctions.
Specific warranty details for pump components, including shaft seals.
Information on obtaining service and warranty claim procedures.
General conditions and requirements for warranty coverage.
Details items and situations not covered by the spa warranty.
Detailed specifications for Core Series spa models, including dimensions and electrical.
Identifies key components and features within the Core Series spa layout.
Describes the different types of jets used in the Core Series spas.
Explains the functions and layout of the topside control panel for Core Series.
How to put the spa into Off Mode for brief maintenance.
Instructions for operating Pump 1 at low and high speeds.
Instructions for operating Pump 2, noting model availability.
How the system regulates and maintains water temperature.
How the Smart Winter Mode protects the spa from freezing.
Information on the cooldown phase of spa operation.
How to control the spa's lighting using the topside control panel.
How to adjust temperature and other parameters using arrow keys.
Accessing and navigating the program menu for settings adjustments.
Steps to set the current time and date on the spa's control system.
Configuring filter cycles, including start time, duration, and frequency.
How to set the desired start time for the spa's filter cycles.
Adjusting the length of time the filter cycles will run.
Determining how often the filter cycles will run per day.
Configuring the Onzen system's cycle duration and frequency.
Adjusting the spa to operate in economy mode to save energy.
Setting the specific time for the economy mode to become active.
Defining how long the economy mode will remain active.
Choosing between Fahrenheit (°F) and Celsius (°C) for temperature display.
Warranty coverage for the Core Series spa shell against water loss.
Warranty for electrical components, pumps, heater, and control systems in Core Series.
Warranty for fuses, lights, jets, and other parts in Core Series.
Specific warranty details for pump components in the Core Series.
Information on obtaining service and warranty claim procedures for Core Series.
General conditions for warranty coverage of the Core Series.
Details items and situations not covered by the Core Series warranty.
An overview of the Spa Boy system, its functions, and benefits.
Diagram and explanation of how the Spa Boy system components connect.
Identification and description of the primary components of the Spa Boy system.
How to find the spa's manufacturing date using the serial number.
Glossary of terms and abbreviations related to Spa Boy operation and water chemistry.
Key water chemistry terms, their abbreviations, and recommended levels.
A flowchart outlining the Spa Boy start-up process and support procedures.
Steps for filling the spa, powering it up, and setting the initial water temperature.
Instructions on setting filtration cycles and duration for the Spa Boy system.
Process for allowing the spa water to stabilize after filling and initial setup.
Procedures for balancing water chemistry with the Spa Boy system.
Guide on correctly using test strips to measure sodium chloride levels.
Tables providing salt dosage recommendations for various spa models.
Guidance on establishing and maintaining sanitizer and pH readings with Spa Boy.
Instructions for routine maintenance tasks related to the Spa Boy system.
Flowchart to diagnose and resolve issues with low ORP readings in the Spa Boy system.
Introduction to the Onzen Salt Water system, its technology, and benefits.
Overview and technical details for the Onzen system.
Comprehensive explanation of Onzen system operation, benefits, and terms.
Definitions and target ranges for key water chemistry parameters.
Glossary of abbreviations used in Onzen system settings.
Step-by-step guide for the initial setup and startup of the Onzen system.
Steps for filling the spa, powering it up, and setting the water temperature.
Procedures for balancing water chemistry when using the Onzen system.
Tables detailing salt dosage requirements for different spa models.
Guide on proper use of test strips for sodium chloride measurement.
How to program filtration and Onzen system settings via the topside controller.
Guidance on monitoring and maintaining sanitizer levels for the Onzen system.
A flowchart to help diagnose and resolve cloudy water issues with the Onzen system.
Frequently asked questions regarding the operation and maintenance of the Onzen system.
A schedule outlining typical water maintenance tasks for the Onzen system.
Guidance on specific maintenance actions to adjust and correct water chemistry.
Step-by-step guide to connect the spa to a network using the built-in WiFi.
How to adjust spa temperature and control pumps using the OnSpa app.
To Next Page