Need help?Do you have a question about the Arctic Spas Mustang and is the answer not in the manual?
General| Heater | 4.0 kW |
|---|---|
| Pump | 2 x 3.0 HP |
| Shell Material | Acrylic |
| Cabinet Material | Synthetic Wood |
| Filtration | Ozone |
| Lighting | LED |
| Warranty | 5 years |
Crucial safety guidelines to follow before and during spa operation to prevent injury.
Explanation of hyperthermia and its risks associated with prolonged hot tub use.
Details on electrical requirements and typical installation diagrams for spa power.
Guidance on safely installing electrical connections according to codes and manufacturer.
Instructions for draining water for custom and classic series spas.
Specific steps for draining the water from a Core Series spa.
Guidelines for cleaning, adjusting, and maintaining spa pillows.
Methods for cleaning and maintaining the spa's acrylic shell surface.
Instructions for cleaning and maintaining both vinyl and weather shield spa covers.
Maintenance advice for cedar and no-maintenance spa cabinets.
Recommendations for properly winterizing the spa to prevent freezing damage.
Technical specifications including dimensions, heater, water capacity, and electrical requirements.
Identification of key components of the custom series spa, like topside control and jets.
Detailed descriptions of different types of jets (3", 5", SDS, Monsoon) and their functions.
Explanation of the topside control panel layout and button functions.
A concise guide to common spa operations like starting pumps, setting temperature, and lights.
Guide on programming filter cycles, duration, and frequency for optimal performance.
List of common error codes displayed on the topside panel and their meanings.
Instructions on updating the spa's software via the Arctic Spas App or website.
Details on the warranty coverage for various spa components and conditions.
Technical specifications for Classic Series models, including dimensions, capacity, and electrical.
Identification of key components of the classic series spa, like topside control and jets.
Detailed descriptions of different jet types (3", 5", Monsoon) and their adjustment methods.
Explanation of the topside control panel layout and its different models.
Detailed guide on operating the topside control panel functions like power, settings, and temperature.
Explanation of different water care modes (Away, Standard, Energy Savings, Weekender).
Guide on programming Onzen system settings via the k500 topside controller.
Accessing maintenance options including reminders and standby mode.
Instructions for connecting the spa's WiFi module to a network.
Information on controlling the spa's audio system via Bluetooth or USB.
A reference list of error codes displayed on the IN.K500 topside controller.
Details on the warranty coverage and conditions for the Classic Series spas.
Technical specifications for Core Series models, including dimensions, capacity, and electrical.
Identification of key components of the core series spa, like topside control and jets.
Detailed descriptions of different jet types (2.5", 4") and their adjustment methods.
Explanation of the topside control panel layout for the Core Series.
Guide on operating basic spa functions like Off Mode, Pump 1, and Pump 2.
Steps for initial spa setup, including water temperature regulation and programming menus.
Instructions for setting filter cycle start time, duration, and frequency.
List of common error codes displayed on the topside controller and their meanings.
Details on the warranty coverage and conditions for the Core Series spas.
Comprehensive guide to the Spa Boy system, its functions, benefits, and operation.
Overview flowchart for the Spa Boy system start-up process.
Steps for filling the spa, powering it up, and setting the initial water temperature.
Guidance on setting filtration cycles and duration for optimal spa water management.
Procedure for stabilizing spa water temperature before chemical balancing.
Steps to establish chemically balanced water using the Spa Boy system.
Table providing salt dosage requirements for different spa models to achieve desired salinity.
Guidance on establishing and maintaining proper sanitizer and pH levels.
Maintenance procedures for the Spa Boy system, including electrode replacement.
A typical water maintenance schedule for Arctic Spas equipped with Spa Boy V1 R1.
Flowchart to troubleshoot low ORP readings and diagnose Spa Boy system issues.
Introduction to the Onzen™ salt water system and its benefits.
Detailed information on Onzen™ system features, benefits, and technical specifications.
Overview flowchart for the Onzen™ system start-up process.
Steps for filling the spa, powering it up, and setting the initial water temperature.
Steps to establish chemically balanced water using the Onzen™ system.
Table providing salt dosage requirements for different spa models for the Onzen™ system.
Guidance on correctly using sodium chloride test strips for water testing.
Instructions for programming custom filtration and Onzen™ system settings.
Guidance on establishing and maintaining proper sanitizer (chlorine) readings.
Flowchart to troubleshoot cloudy water conditions within the Onzen™ system.
Answers to common questions regarding the operation and maintenance of the Onzen™ system.
A typical water maintenance schedule for Arctic Spas fitted with the Onzen™ system.
Step-by-step guide for connecting the spa to WiFi and setting up the Arctic Spa App.
How to adjust spa temperature and control pumps using the app interface.
To Next Page