Need help?Do you have a question about the Arctic Spas Midnight Sun and is the answer not in the manual?
General| Seating Capacity | 6-7 |
|---|---|
| Waterfall Feature | Yes |
| Heater | 4.0 kW |
| Energy Efficiency | Full foam |
| Insulation | Full foam |
| Shell Material | Acrylic |
| Ozone System | Ozone |
Covers grounding, bonding, and precautions against electric shock from appliances.
Information on the heat.wav heater, its specifications, and integrated dry-fire protection.
Details on connecting high-voltage accessories using 0.250" quick-connect terminals or AMP pins.
An internal hardware error has been detected in in.xe. Contact dealer or service supplier.
System shut down: heater reached 119°F (48°C). Follow steps to cool down.
System does not detect water flow during pump operation. Check valves, filter.
Problem detected with the temperature probe. Call your dealer or service supplier.
Spa water temperature reached 108°F (42°C). Do not enter water.
Diagnosing and resolving the Hr error message with flow charts and step-by-step instructions.
Flow chart to diagnose why Pump 1 is not working, checking errors and voltage.
Step-by-step guide for troubleshooting Pump 1, checking indicators, fuses, and keypad.
Flow chart to diagnose why Pump 2 or blower is not working, checking errors and voltage.
Step-by-step guide for troubleshooting Pump 2/blower, checking indicators, fuses, and keypad.
Flow chart to diagnose circulation pump failure, checking programming and voltage.
Step-by-step guide for troubleshooting circulation pump, checking fuses and voltage readings.
Flow chart to diagnose ozonator failure, checking filter indicator and voltage.
Step-by-step guide for troubleshooting ozonator, checking voltage, fuses, and spa pack.
Flow chart for diagnosing general system failures in North American models.
Step-by-step voltage checks for 240V/120V systems and keypad connection verification.
Flow chart for diagnosing general system failures in European models based on voltage readings.
Step-by-step voltage checks for 1, 2, 3-phase systems and transformer fuse verification.
Flow chart to diagnose why the spa is not heating, checking errors and voltage.
Step-by-step guide for troubleshooting no heat, checking indicators, screws, and heater connections.
Steps to troubleshoot a non-functional keypad, including connection checks and spare keypad use.
Diagnosing and resolving issues related to GFCI trips, including wiring and output checks.
To Next Page