Need help?Do you have a question about the Arctic Spas Eagle and is the answer not in the manual?
General| Brand | Arctic Spas |
|---|---|
| Model | Eagle |
| Category | Hot Tub |
| Language | English |
General overview of Arctic Spas and their quality.
Critical measures to prevent unauthorized access and accidental drowning by children.
Guidelines for safe electrical installations, grounding, and appliance placement.
Warnings regarding water temperature, alcohol, drugs, pregnancy, and medical conditions.
Important warnings about suction guards, hygiene, entry/exit, and chemical use.
Explains how prolonged immersion in hot water can induce hyperthermia and its symptoms.
Essential steps for preparing the installation site, ensuring a level and stable surface.
Guidelines for installing a spa on outdoor ground surfaces, including foundation requirements.
Considerations for installing a spa on a deck, including load capacity checks.
Specific site preparation requirements for All Weather Pools to ensure structural integrity.
Critical instructions for safe and compliant electrical installation by licensed professionals.
Step-by-step guide for correctly filling and preparing the spa for operation.
Procedures for draining water from Custom, Classic, and Core series spas.
Instructions for removing, cleaning, and installing filter cartridges for various series.
How to care for spa pillows and clean the spa shell surface.
Guidelines for cleaning and maintaining vinyl and weather shield spa covers.
Maintenance for cedar and NOM cabinets, and procedures for winterizing the spa.
Fundamental areas of water maintenance: chemical balance, sanitation, and filtration.
Overview of methods and key parameters for testing spa water quality.
Practical advice for accurate water testing using reagent kits.
Essential safety guidelines for handling spa chemicals properly.
Procedures for adding chemicals to the spa water while pumps are running.
How to manage minerals like calcium and copper in spa water.
Steps to maintain the recommended Total Alkalinity level for stable pH.
How to adjust and maintain the spa water's pH for optimal conditions.
Understanding and maintaining Calcium Hardness levels for spa health.
Importance of sanitizer and recommended products for maintaining water hygiene.
Guidelines for using the chlorine system, including start-up and weekly tasks.
Addresses frequent problems like no function, heating, or jet pressure, with troubleshooting steps.
Introduction to the Custom Series, highlighting its design and technology.
Detailed specifications for various Custom Series models, including dimensions and electrical requirements.
Location and function of the topside control panel for spa operations.
Identification of jets, waterspouts, diverters, and venturi features.
Details on 3-inch jets, their adjustability, and operation for massage.
Details on 5-inch hydro-massage jets, adjustability, and operation.
Information on SDS jetting configuration and powerful massage.
Description of the large hydro-massage jet for specific body area relief.
Identifies and explains the function of each button and indicator on the topside control.
Quick guide on starting and stopping pumps 1, 2, and 3, and SDS.
How to set water temperature, adjust units, and use special modes.
Instructions for controlling lights, boost mode, and fogger waterfall features.
Guide to programming filter start time, duration, and frequency for optimal operation.
Explains common error codes displayed on the topside control panel and their meaning.
Instructions on how to update spa software via app, website, or link.
Covers warranties for spa shell, floor, cabinet, and covers.
Details warranties for electrical, plumbing, Onzen, Spa Boy, and audio systems.
Information on pump warranty, performance claims, and service conditions.
Outlines conditions for warranty coverage, registration, and service claims.
Lists items and conditions not covered by the Arctic Spas warranty.
Introduction to the Classic Series, highlighting its engineering and design.
Detailed specifications for various Classic Series models, including dimensions and electrical requirements.
Location and function of the topside control panel for spa operations.
Identification of jets, waterspouts, diverters, and venturi features.
Details on 3-inch jets, their adjustability, and operation for massage.
Details on 5-inch hydro-massage jets, adjustability, and operation.
Description of the large hydro-massage jet for specific body area relief.
Diagrams showing the topside control panel for different spa configurations.
Explains power up, settings key, power-off, and main screen display functions.
How to start/stop accessories like pumps, lights, and stereo.
Setting and monitoring spa water temperature and heater status.
Navigating the settings menu for various spa configurations and information.
Explains different water care modes for filtration and heating settings.
How to modify filter cycles and duration for optimal water care.
Configuring Onzen system settings for chlorine production and cycles.
Controls for the spa's audio system, including Bluetooth and source selection.
Managing maintenance reminders and using standby mode for servicing.
Steps to connect the spa's in.touch module to a wireless network.
Detailed control of audio playback, volume, tracks, and disconnect options.
Explains common error messages from the IN.K500 topside and their potential causes.
Details warranty periods for spa shell, floor, equipment, plumbing, and other parts.
Covers warranties for Onzen, WetTunes, and pump systems, including performance.
Outlines warranty terms, service, and purchase requirements for Classic Series.
Lists items and conditions not covered by the Classic Series warranty.
Introduction to the Core Series, highlighting its construction techniques and budget-friendliness.
Detailed specifications for various Core Series models, including dimensions and electrical requirements.
Location and function of the topside control panel for spa operations.
Identification of jets, waterspouts, and venturi features on the Core Series.
Details on 2.5-inch jets, their adjustability, and operation for massage.
Details on 4-inch hydro-massage jets, adjustability, and operation.
Diagrams showing the topside control panel for different spa configurations.
How to activate and use the Off Mode for brief spa maintenance.
Instructions for operating Pump 1 and Pump 2 (if available) for spa functions.
How the system regulates water temperature and uses the heater.
Explains the use of Light, Up/Down keys, and the Program Menu.
Information on Cooldown and Smart Winter Mode for system protection.
Guide to setting the spa's internal clock for accurate timekeeping.
Instructions for setting the filter start time, duration, and frequency.
How to set the start time, duration, and frequency for filter cycles.
Setting Onzen system cycles for chlorine production start, duration, and frequency.
How to configure economy mode for temperature reduction during specific times.
Setting start time and duration for economy mode.
How to switch between Fahrenheit and Celsius display units.
Explains common error codes displayed on the topside control panel and their potential causes.
Details warranty periods for spa shell, floor, equipment, plumbing, and other parts.
Covers warranties for Onzen, WetTunes, and pump systems, including performance.
Outlines warranty terms, service, and purchase requirements for Core Series.
Lists items and conditions not covered by the Core Series warranty.
Introduction to Spa Boy® as an advanced automated water care system for spas.
Guidance on acquiring specific technical data for your spa.
Explains what Spa Boy is, its functions, and key benefits.
Explains the operational mechanism and data flow of the Spa Boy system.
Visual representation of the Spa Boy system components and their connections.
Identifies and illustrates the primary components of the Spa Boy system.
Details about Spa Boy system versions and upgrade possibilities.
How to find the spa's manufacturing date from the serial number.
Defines key terms related to the Spa Boy system like electrode, sensor, and communication cable.
Explains terms like Calcium Hardness (CH) and its impact on spa water.
Defines Total Alkalinity (TA) and Potential Hydrogen (pH) and their importance.
Details pH levels, their effect on chlorine effectiveness, and target ranges.
Defines ORP, Free Chlorine (FCL), and Chlorine Residual for water monitoring.
Defines sanitizer types, organic waste, and shock treatments for spa care.
Lists abbreviations and correct chemical levels for spa water.
Provides target ranges for CH, TA, pH, FCL, and ORP for optimal spa water.
Flowchart outlining the initial setup process for the Spa Boy system.
Step-by-step guide for filling the spa and turning on electrical power.
Instructions on how to set the desired water temperature using the topside controller.
How to program filtration cycles and duration for optimal water management.
The process of stabilizing spa water temperature before balancing chemistry.
Initial steps for chemically balancing spa water with Spa Boy.
Detailed steps for testing and adjusting pH, mixing salt, and adding it to the spa.
How to test and maintain the correct sodium chloride level for the system.
A step-by-step guide for accurately using sodium chloride test strips.
Tables providing salt dosage recommendations for Custom and Classic spa models.
Guidance on establishing and maintaining sanitizer and pH readings.
Step-by-step instructions for replacing the Spa Boy output electrode.
Instructions for caring for the Spa Boy sensor and protecting it during draining.
Addresses how salt addition affects pH and what to do if ORP readings are low.
Answers questions about adding sanitizers and preventing electrode impedance issues.
Addresses sudden water discoloration and the role of pH in these changes.
Answers questions about cloudy water, scale removers, softened water, and system flushing.
How to manually activate the Spa Boy system for increased sanitizer during heavy use.
Overview of the Onzen™ system, its benefits, and technology.
Guidance on acquiring specific technical data for your spa.
Explains what Onzen is, its functions, benefits, and how it works.
How to determine the spa's manufacturing date from the serial number.
Defines key terms for Onzen system like electrode and electrode version.
Explains Calcium Hardness (CH) and Total Alkalinity (TA) in spa water.
Details pH levels, their effect on chlorine effectiveness, and target ranges.
Defines chlorine, sanitizer, organic waste, and shock treatments.
Lists abbreviations and correct chemical levels for spa water.
Defines abbreviations like Fd (Filter Duration) and FF (Filter Frequency).
Defines abbreviations for Onzen Cycle Duration (On).
Provides an overview flowchart for the Onzen system start-up process.
Step-by-step guide for filling the spa and turning on electrical power.
Instructions on how to set the desired water temperature using the topside controller.
Steps for testing and adjusting Calcium, Total Alkalinity, and pH.
Instructions for mixing salt crystals for the Onzen system.
Tables providing salt dosage recommendations for spa models and estimated salt impact.
Guidance to ensure correct usage of sodium chloride test strips.
Process of stabilizing spa water temperature before chemistry adjustments.
Visual guide for taking water samples and using sodium chloride test strips correctly.
Steps to program custom filtration settings for the spa.
Guide to programming Onzen cycle duration, filter duration, and frequency.
Guidance on establishing and maintaining sanitizer readings for the Onzen system.
A flowchart to diagnose and resolve cloudy water issues with the Onzen system.
Answers common questions about system operation, chlorine levels, and pH.
Addresses typical maintenance needs and water quality questions.
Answers questions regarding scale removers, phosphates, and using softened water.
Guidance on performing system flushes before refilling the spa.
Critical notice and instructions for replacing the Onzen V8 salt cell.
Outlines the typical water maintenance schedule for Onzen systems.
Guidance on adjusting TA, pH, FCL, CH, and Sodium Chloride levels.
Introduction to connecting the spa via built-in WiFi.
Instructions for downloading the Arctic Spa app from app stores.
Steps to establish the WiFi connection for the spa.
Steps to set up a new connection by launching the spa's Access Point.
Steps to create a new user account for the OnSpa app.
Entering spa nickname, serial number, and registration code for setup.
How to find and enter the spa's registration code.
How to adjust temperature, turn pumps on/off, and use the EZ button.
To Next Page