42 / EN
Washing Machine / User’s Manual
• Cămăși (Shirts)
This programme is used to wash the shirts made from cotton, synthetic and synthetic blended
fabrics altogether. It reduces wrinkles. Steam is applied at the end of the programme to help the
wrinkle reducing function. The special spin profile and steam applied at the end of the programme
reduce the wrinkles on your shirts. When the quick wash function is selected, the Pre-treatment
algorithm is executed.
• Apply the pre-treatment chemical on your garments directly or add it together with detergent
when the machine starts to take water from the main washing compartment. Thus, you can obtain
the same performance as you obtain with normal washing in a much shorter period of time. Usage
life of your shirts increases.
• Geci cu puf Пір‘я (Down Wear)
Use this programme to wash your coats, vest, jackets etc. containing feathers with a „machine-
washable“ label on them. Thanks to special spinning profiles, it is ensured that the water reaches the
air gaps amongst the feathers.
Steam is applied at the end of the programme to soften bulky laundry such as towels.
•
Autocurăţare
(Drum Cleaning)
Use regularly (once in every 1-2 months) to clean the drum and provide the required hygiene. Steam
is applied before the programme to soften the residues in the drum. Operate the programme while
the machine is completely empty. To obtain better results, put powder lime-scale remover for
washing machines into the detergent compartment no. „2“. When the programme is over, leave the
loading door ajar so that the inside of the machine gets dry.
C
This is not a washing programme. It is a maintenance programme.
Do not run the programme when there is something in the machine. If you try to do so, the machine detects that
there is load inside and aborts the programme.
4.3.7 Specal programmes
For specific applications, select any of the following programmes.
• Clătire (Rinse)
Use when you want to rinse or starch separately.
• Stoarcere+Evacuare (Spin+Pump)
You can use this function to remove the water on the garment of drain the water in the machine.
Before selecting this programme, select the desired spin speed and press Start / Pause button. First,
the machine will drain the water inside of it. Then, it will spin the laundry with the set spin speed and
drain the water coming out of them.
If you wish to drain only the water without spinning your laundry, select the Pump+Spin programme
and then select the No Spin function with the help of Spin Speed Adjustment button. Press Start /
Pause button.
C
Use a lower spin speed for delicate laundries.
4.3.8 Speed selecton
Whenever a new programme is selected, the recommended spin speed of the selected programme is
displayed on the spin speed indicator.
To decrease the spin speed, press the Spin Speed Adjustment button. Spin speed decreases
gradually. Then, depending on the model of the product, "Rinse Hold" and "No Spin" options appear
on the display. When "No Spin" is selected, the rinse level indicator lights will not turn on.
To Next Page
Loading...
