To Next PageTo Next Page
Need help?Do you have a question about the arcweld 130i-ST and is the answer not in the manual?
General| Input Voltage | 230 V |
|---|---|
| Output Current Range | 10-130A |
| Duty Cycle at 130A | 30% |
| Input Current | 20A |
| Protection Class | IP21S |
| Input Phase | 1 |
| Input Frequency | 50/60 Hz |
| Rated Input Current | 20A |
| Rated Output Voltage | 25.2V |
| Efficiency | 85% |
| Power Factor | 0.73 |
| Welding Process | MMA (Stick) |
Discusses the potential dangers of electric and magnetic fields during welding and necessary precautions.
Highlights the lethal risks of electric shock and essential safety measures to prevent contact.
Warns about the burn risks from arc rays and the protective equipment and measures required.
Explains hazards associated with welding fumes and gases and ventilation requirements.
Details risks of welding sparks causing fire or explosion and preventative actions.
Warns about the potential for gas cylinders to explode if damaged and safe handling.
Covers safety practices for electrically powered equipment during installation and grounding.
Provides an overview of the arcweld inverter machines and their general capabilities.
Explains the welding capabilities and the concept of duty cycle with an example.
Describes the volt-ampere relationship in MMA welding with a graphical representation.
Instructions on not stacking machines and placing them on a level surface.
Details the technical specifications for single-phase input power for various models.
Lists the rated output (Amperes and Volts) for DC welding across different duty cycles.
Provides specifications for power factor, efficiency, protection, and insulation class.
Lists the physical dimensions (length, width, height) and weight of the machines.
Specifies the operating and storage temperature ranges for the equipment.
Essential safety warnings for electric shock, fumes, gases, and sparks during installation.
Covers input voltage, phase, frequency, and connection requirements.
Guidelines for operating the machine with engine-driven generators.
Explains the quick disconnect system for welding cable connections.
Instructions for connecting cables for SMAW welding, including polarity.
Instructions for connecting cables for TIG welding, including polarity and torch setup.
Explains the function of power buttons, switches, and indicator lights.
Details how to select welding mode and adjust output current for optimal performance.
Explains features like Hot Start and Anti-Sticking to improve arc initiation and prevent electrode sticking.
Guidance on common joint types and how to select the appropriate welding electrode.
Recommendations for the operating environment and important operational notices.
Identifies common welding defects, their causes, and prevention methods.
Outlines scheduled maintenance tasks from daily to yearly checks.
Crucial safety warning about shutting off power and waiting before performing maintenance.
Instructions on how to effectively use the troubleshooting guide to diagnose issues.
Reiterates critical safety warnings related to electric shock and general caution.
Lists common problems, their possible causes, and recommended solutions.
Electrical schematic for the Arcweld 130i-ST model.
Electrical schematic for the Arcweld 130i-ST DV model.
Electrical schematic for the Arcweld 200i-ST model.
Electrical schematics for Arcweld 160i-ST DV and 200i-ST DV models.
Detailed steps for installing the TIG Torch K1782-7, including connections and setup.
List of spare parts for the Arcweld 130i-ST model with item codes and quantities.
List of spare parts for the Arcweld 130i-ST DV model with item codes and quantities.
List of spare parts for the Arcweld 160i-ST DV model with item codes and quantities.
List of spare parts for the Arcweld 200i-ST model with item codes and quantities.
List of spare parts for the Arcweld 200i-ST DV model with item codes and quantities.
Details the warranty duration, conditions for coverage, and service procedures.
Outlines exceptions to the warranty and purchaser's legal rights.
