To Next Page
L
Lori KellyAug 9, 2025
What to do if welding leads are damaged on arcweld Welding System?
- DDanielle VillaAug 9, 2025
If the welding leads of your arcweld Welding System are damaged, replace the leads.
What to do if welding leads are damaged on arcweld Welding System?
If the welding leads of your arcweld Welding System are damaged, replace the leads.
Why the fan does not rotate after the arc welding machine is overheated in arcweld Welding System?
If the fan of your arcweld Welding System doesn't rotate after overheating, it might be due to something blocking the fan blade. Remove the obstruction to resolve this.
How to fix the LED display if it doesn't work on arcweld Welding System?
If the LED display of your arcweld Welding System doesn't work, maintain or replace the display PCB.
What to do if the fan is damaged in arcweld Welding System?
If the fan of your arcweld Welding System is damaged, change it immediately.
What to do if the fan still does not rotate after trying to spin the blade in arcweld Welding System?
If the fan of your arcweld Welding System still does not rotate after trying to spin the blade, replace the start capacitor.
What to do if the switch is not operational on arcweld Welding System?
If the switch of your arcweld Welding System is not operational, replace it immediately.
General| Input Voltage | 230V |
|---|---|
| Output Current Range | 30-180A |
| Wire Diameter | 0.6-1.0mm |
| Protection Class | IP21S |
| Wire Feed Speed | 2-15 m/min |
