16 / 56
To end the cooking program, press the key; the fan remains on for about 20 seconds. After
this time, the timer emits 5 short beeps and the appliance switches off.
NOTE: some types of food require stirring or flipping halfway through cooking. In this case, remove
the container from the appliance, taking care to touch only the handle; the program will stop
momentarily when the container is removed; shake the container (or turn the food upside down) and
reinsert it into the appliance; the fryer will be reactivated as soon as the container is reinserted and
the cooking cycle will resume from the point at which it was interrupted.
NOTE: use the handle and be careful not to touch the container and the inside of the appliance to
avoid burns.
END OF COOKING
- Once the time is up, the fan remains active for about 20 seconds. After this time, the timer emits 5
short beeps and the appliance switches off.
Remove the container and check that cooking is complete. If it isn’t, put the container back in and set
the timer.
- When cooking is finished, remove the container and place it on a heat-resistant surface.
- Separate the basket from the cooker by pressing the release button (5), first moving the plastic
protection by sliding it forward; take care not to touch the pot, the basket and the inside of the
appliance.
- Pour the contents of the basket into your preferred container (plate etc.).
- To reattach the basket, insert it into the basket slot until you hear a 'click'.
The fryer can be re-used immediately without waiting for it to cool down.
After use:
- Reposition the container (6) in the fryer.
- Disconnect the appliance from the power outlet and let it cool down.
- Clean the container and the basket as indicated in the “CLEANING AND MAINTENANCE”
paragraph.
(EN) PROGRAMS AND SETTINGS
List of programs
To Next Page
Loading...
