461306186 (A-000)
14
GB
MINIMUM DIMENSIONS OF THE UNIT TO HOUSE THE OVEN
Height
mm
Width
mm
Depth
mm
Volume
dm
3
57056055053
ELECTRICAL COMPONENTS
Description Nominal data
Lower heating element of the oven
Top heating element of the oven-grill
Rear heating element of the oven
Grill heating element
Oven lamp
Tangential or cooling fan
Fan of the rear heating element
Supply cable
1400 W
700+1800 W
2000 W
1800 W
15 W - E 14 - T300
18..22 W
25..29 W
H05 RR-F 3x 1.5 mm
2
6. INSTALLER INSTRUCTIONS
TECHNICAL INFORMATION
All instructions related to installation and maintenance operations listed in this section must be
carried out only by authorised personnel.
The manufacturer cannot be held responsible for any damage to persons or property resulting from
an incorrect installation of the appliance.
UNPACKING YOUR APPLIANCE
• Once the packaging has been removed, thoroughly check that the appliance is in perfect condition. If you
have any doubts do not use the appliance and call our Service Centre.
• Do not move the appliance by the handles.
• Some parts mounted on the appliance are protected by a plastic fi lm. This protection must be removed before
using the appliance. We recommend slitting the plastic fi lm along the edges with a sharp knife or pin.
All packaging materials used (cardboard boxes, bags, polystyrene foam, nails, etc.) must be kept
out of the reach of children, as they are a potential hazard source. All packaging materials used are
environmentally-friendly and recyclable (wooden bits are free from chemicals, cardboard is 80-100%
recycled, protective bags are made in polyethylene (PE), bands in polypropylene (PP) and padding
in polystyrene foam (PS) without chloro-fl uoro-carbides. Waste materials can undergo treatment and
be recycled saving on new raw materials and on the amount wasted volumes. For this purpose we
suggest you take the packaging material back to the shop you bought the appliance or to a collecting
service. Ask your local service for the nearest service.
WARNINGS
• As this is a built-in oven, please ascertain that the walls or panels surrounding the appliance can
withstand a temperature of over 70 K.
• Also make sure that the glue that joins the laminated plastic coat to the unit can withstand a
temperature of around 150°C, to avoid the laminated coat to unglue.
5. TECHNICAL FEATURES
To Next Page
Loading...
