Ardwolf A30 - Page 9

13. How to add multi-user card (with time restriction)
▲ Function Code: 01#
{#Master code#}+{01#}+{index No. #}+ touch {card (1)}+
{yymmddhhmm#(start time ) } + {yymmddhhmm#(end
time)} +{index No. #}+ touch {card (2)} +
{yymmddhhmm#(start)}+ {yymmddhhmm#(end time)}
…and so on
14. How to disable one user code or user card with index
No.
▲ Function Code: 02#
{#Master code#}+{02#}+{index No.#}
15. How to enable one user code or user card with index
No.
▲ Function Code: 03#
{#Master code#}+{03#}+{index No.#}
16. How to enable passage mode and schedule (lock back
when the passage mode end)
▲ Function Code: 15#
{#Program#}+{15#}+{weekly schedule}+{#}+{begin time &
ending time#}
17. How to disable passage mode
▲ Function Code: 16#
#Master#}+{16#}
18. How to enable LED blink light (on & off)
▲ Function Code: 18#
{#Master code#}+{18#}
19. How to disable daytime saving
▲ Function Code: 32#
{#Master code#}+{32#}
20. How to set up one time service code (up to 10 service
codes)
▲ Function Code: 33#
{#Master code#}+{33#}+{service code(1)#}+ {service
code(2)#}+… and so on
21. How to delete all one time service codes
▲ Function Code: 23#
{#Master code#}+{23#}
22. How to delete user code or user card with index #
▲ Function Code: 44#
{#Master code#}+{44#}+{index#}
23. How to enable auto-unlock function
▲ Function Code: 64#
{#Master code#}+{64#}
24. How to setup auto-unlock time (it will auto unlock the
door everyday at assigned time)
▲ Function Code: 63#
{#Master code#}+{63#}+{HHMM#}
25. How to disable auto-unlock function
▲ Function Code: 65#
{#Master code#}+{65#}
26. How to enable auto-lock function
▲ Function Code: 67#
{#Master code#}+{67#}
27.How to setup auto-lock time (it will auto lock the door
everyday at assigned time)
▲ Function Code: 66#
{#Master code#}+{66#}+{HHMM#}
14 15