Arecont Vision AV12176DN-NL User Manual

SurroundVideo® Omni
Installation Best Practice
No
Begin Installation
Wind Vinyl electrical
tape on all cables
connections
Adding Teflon thread sealing
tape to all male threads
Does conduit pipe go
through the wall?
Make sure position of conduit hole is at the lower side
forming a “drip loop” below the camera using ¾”
galvanized or flex conduit and appropriate fittings
Connect ¾” NPT conduit
pipe to junction box adapter
Yes
Tighten all camera
screws and ¾”
NPT plugs
Caulk the perimeter of
the mounting area
Conduct periodic inspections of the installation.
Rust on the metal parts or screws may result in
damage to camera
End Installation
Not Recommended!
Not Recommended!
Recommended!
Recommended!

Arecont Vision AV12176DN-NL Specifications

General

Brand	Arecont Vision
Model	AV12176DN-NL
Category	Security Camera
Language	English