Areva DXC 5000 - Page 34

DXC5K/EN IN/A22 Installation
Page 32/34 DXC 5000
U-PORT Line Item (All
ports)
Default
Channel B1
Speed 64 Kbps
ATM FR T1 Line Items Default
Frame Format Mode ESF
Line Code Mode B8ZS
Line Build Out 0 dB
Yellow Alarm ON
Alarm Indication Signal FRAMED
Interface LONG HAUL
ATM FR E1 Line Items Default
Frame Format Mode ON
Line Code Mode HDB3
CRC ON
RAI ON
Alarm Indication Signal FRAMED
CAS OFF
FDL OFF
Sa_bit Sa4
Interface 120 Ohm (Hardware)
Router Setup Default
Net_Address 000.000.000.000
Netmask 000.000.000.000
Gateway_Address 000.000.000.000
NI_Address 000.000.000.000
Metric 01
E&M Card Default Configuration
Item Option/ Range Default
Side A Side, B Side Depending on
side switch
setting
Impedance 600 ohm, 900 ohm 600 ohm
Signaling Type1, Type 2, Type 3, Type 4,
and Type 5 or Tx only
Type 5
Tx Gain -10 to +7 dB 0 dB
Rx Gain -10 to +14 dB 0 dB