Need help?Do you have a question about the Areva MiCOM P225 and is the answer not in the manual?
Provides detailed information and guidance for the MiCOM P225 motor protection relay.
Illustrates the standard wiring configuration for the MiCOM P225 relay.
Presents a general application diagram for relay connections.
Details the procedure for establishing the earth connection for the relay.
Specifies the requirements and connections for the auxiliary power supply.
Describes the specifications and wiring for current measurement inputs.
Details the specifications and wiring for voltage measurement inputs.
Explains the specifications and configuration of binary inputs.
Describes the specifications and functionality of the output relays.
Details the RS232 port for local communication and its connection.
Describes the RS485 rear port for communication and its connection.
Explains the optional analogue output features and their use.
Details the RTD input option for temperature monitoring.
Details the thermistor input option for temperature monitoring.
Details the various protection functions of the relay.
Explains the automation functions available in the relay.
Describes optional features that can be configured.
Details the capabilities for recording events, faults, and disturbances.
Covers the communication protocols and settings.
Specifies the details of the relay's inputs and outputs.
Provides information on the accuracy of the relay's measurements.
Details the specifications for Current Transformers (CT) and Voltage Transformers (VT).
Specifies the high voltage withstand capabilities of the relay.
Describes the electrical environmental conditions for operation.
Details the environmental operating conditions.
Presents graphical data for thermal overload characteristics.
Provides a table for converting RTD impedance to temperature values.
Lists equivalence between analogue output signals and remote measurements.
Provides general information and defines the document's scope.
Offers a comprehensive description of the MiCOM P225 relay.
Details the front panel components, LEDs, keypad, and display.
Explains the structure and navigation of the relay's menu system.
Describes the configuration and use of protection groups G1 and G2.
Details the automation control menu for motor operation.
Explains the functionality for recording events, faults, and disturbances.
Provides information on how to interpret and manage alarm messages.
Provides general information on relay reception and handling.
Details precautions for handling electronic components safely.
Outlines the procedures for installing the relays.
Provides instructions for safely unpacking the relays.
Gives guidelines for storing the relays properly.
Crucial safety information for working with the relay.
Covers installation, commissioning, and maintenance procedures.
Details cable terminals for MiCOM Px2x series.
Provides the physical dimensions of the relay case.
Details for identifying the specific relay model and its configuration.
Lists points to check during the inspection stage.
Procedure for verifying measured input values against applied values.
Covers various parameter menus for configuration and verification.
To Next Page
General
