〖Operating Instruction〗
Electrical safety
Grounding: This room air conditioner must be grounded.
Grounding reduces the risk of electric shock by providing an escape wire for the electric current.
If the power cord has a grounding plug with a grounding wire, plug it into an outlet that is properly
installed and grounded.
If the power cord has not a grounding plug with a grounding wire ,the grounding wire must connect
the breaker that is properly installed and grounded.
Warning: Improper use of the grounding plug or breaker can result in a risk of electric shock. Call a qualified
electrician if you don’t understand the grounding instructions or if you are not sure if the air conditioner
is properly grounded. If the wall outlet or breaker
is not grounded, please contact an electrician to have it replaced with a properly grounded outlet or
breaker.
Do not, under any circumstances, cut or remove the third (ground) prong from
the power cord.
Adapter plug: We strongly advise against using an adapter plug or breaker.
Operating conditions
1. Temperature:T1 instance: -7℃~43℃(16℃~43℃ in cooling-only type)
T3 instance: -7℃~52℃(16℃~52℃ in cooling-only type)
If the unit runs beyond the temperature for a long time, it may cause cooling capacity to decrease or
protector to work.
2. Relative humidity: <80%
If the unit runs beyond the humidity range, condensate may be formed near blade and outlet of air conditioner. It’ s
normal.
WARNINGS
Following the safety messages is very important. These messages can save
you from being injured or killed. Warning symbols alert you to be careful and
means danger. Always follow instructions to be safe and reduce chances of
injury or death. Warning and danger signs will precede safety messages.
To Next Page
Loading...