The display can show the set temperature,error codes or timing time.
This signal light is on when the unit is in “RUNNING” status.The signal light will
flash when is in Defrosting or Cooling airflow proof.
This signal light is on when the unit is in Timer.
This signal light is on when the compressor is running.
Flashing on behalf of searching,lighting on behalf of WIFI completed
connection,which means WIFI function can be operation and application.(For
more details,please refer to the WIFI instruction manual)
This signal light is on when the unit is in health function.
This signal light is on when the electric heater is running.
This signal light is on when the unit is in “GEN LINK MODE” status.
Note:The above LED display is for reference only, subject to the actual product.
To Next Page
Loading...