EasyManua.ls Logo

ARG CSD-09QD - Installation Manual

Default Icon
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
USER’S MANUAL
-18-
INSTALLATION MANUAL
Installation Guide
This air conditioner meets the safety and operation standards promulgated by the Nation.
You need to invite professional air conditioner service and maintenance personnel to install or remove
the air conditioner. Problems may occur and you may suffer losses if non- professionals install the air
conditioner.
User shall provide the power that meets installation and operation requirements. please refer to
nameplate for details about the voltage for this product. Voltage beyond this scope will affect the
normal operation of the air conditioner.
Separate power point with delay fuse protector or automatic breaker should be used for the air
conditioner.
The air conditioner must be correctly and reliably grounded, or it may cause electric shock or fire.
Do not switch on the power of the air conditioner before well connecting and carefully checking the
tubing and wires.
The appliance shall not be installed in laundry or bathroom.
In case necessary, please consult your supply authority for system information.
The plug shall be accessible after installed the appliance.
This instruction is subject to change without notice.
Installation of Accessories
Examine carefully the attached packing list and check whether the accessories are complete.
Users may need to buy at their own expenses the articles not included in the packing list and may be
needed in installing.
Position for Indoor Unit
Away from the place where there is heat source,
steam source, leakage of flammable gas and
smoke.
No obstacles near the inlet and outlet, and keep
good ventilation.
Good discharge for water.
At least 1m away from wireless equipment (such
as TV, radio etc.).
Mounted on the wall that can bear the weight of the
air conditioner and won't produce noise while unit
working.
The distance between the indoor unit and the floor should be greater than 2.3m.
The plug shall be accessible after installing the appliance.
Ensure the distance as required in Fig.1.
The back of the indoor unit should be close to the wall(Fig.1)
At least 15cm
Fig.1
Indoor unit
At least 15cm
At least 15cm