EasyManua.ls Logo

ARGENTO Active Bike - Quick Start Guide; Initial Setup and Riding Basics

ARGENTO Active Bike
493 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
22
• Prior to using the item for the first time, charge to 100%.
• Check tyre pressure (see side of tyre for recommended value). If the item does not reach
at least 60% of the declared kms, or the maximum speed within the first 3 months of
use, it is likely that the wheels have deflated once more. In this case, restore pressure as
indicated.
• Check and adjust the brakes.
• Insert the key into the ignition switch to activate the display (Active Bike).
• Switch on the display (Active Sport, Argento by Pininfarina KPF).
• Place the item on a flat surface.
• Hold the handlebar firmly using both hands. Step onto the footrest with one foot and use
the other to give yourself a gentle push and accelerate.
CAUTION
Zero Start Function: the throttle is activated once the forward speed exceeds 3 km/h.
For safety reasons, the item is initially set up to avoid standing starts.
• When riding the item, tilt body in the riding direction during a turn and slowly turn the
handlebars.
• To stop the item, release the throttle, pull the brake lever(s).
• To get o, first stop the item completely. Getting o the moving item can cause injury.
• Prior to each use, check brakes and any wear, check tyre pressure (see side of tyre for
recommended value), wheel wear, throttle and charge status of battery.
Adjustments:
Brake levers and handlebar (Active Bike)
The angle of the handlebar can be
adjusted by loosening the lever on
the handlebar (A) and turning the
handlebar up/down.
The height of the handlebar can be
adjusted by loosening the lever on
the stem (B), moving the handlebar
up/down.
Once the position has been
adjusted, lock the handlebar/stem
lever once more.
6. Quick guide

Related product manuals