85264189902000
Contents
Page
IMPORTANT!
Please Read Before Starting .................................. 1
1. GENERAL .......................................................... 2
1-1. Tools Required for Installation (not supplied)
1-2. Accessories Supplied with Unit
1-3. Optional Copper Tubing Kit
1-4. Type of Copper Tube and Insulation Material
1-5. Additional Materials Required for Installation
2. INSTALLATION SITE SELECTION ................... 3
2-1. Indoor Unit
2-2. Embedding the Tubing and Wiring
3. HOW TO INSTALL THE INDOOR UNIT ............ 9
3-1. Remove the Rear Panel from the Unit
3-2. Make a Hole
3-3. Install the Rear Panel on the Wall
3-4. Remove the Grille to Install the Indoor Unit
3-5. Shape the Indoor Side Tubing
3-6. Wiring Instructions
3-7. Wiring Instructions for Inter-unit Connections
3-8. Mounting
3-9. Drain Hose
4. HOW TO SECURE THE WIRELESS REMOTE
CONTROL UNIT................................................ 18
4-1. Mounting on a Wall
5. ADDRESS SETTING OF THE REMOTE
CONTROL UNIT................................................ 19
5-1. Setting the Remote Controller Address
5-2. Operating Multiple Indoor Units with a Single
Remote Controller
6. TEST RUN......................................................... 20
7. INSTALLATION CHECK SHEET ...................... 20
Model Combinations
Combine indoor and outdoor units only as listed
below.
Indoor Unit Outdoor Unit
AWMI28AHL AE2MI56AH
AWMI36AHL AE3MI70AH
AWMI50AHL AE4MI91AH
AWMI70AHL
Power Source:
50 Hz, single-phase, 220 – 240 V / 60 Hz,
single-phase 220 V
Combinations of indoor and outdoor units
Connect indoor and outdoor units only in the com-
binations listed in the catalog or installation manual.
Connecting any other model may result in
operation failure and system damage.
COOL/DRY/HEAT Model
To Next Page
Need help?
General
