Argo AG4HP163PH - User Manual

Air/water Heat pump
Monobloc
Installation Manual
MODELS:
AG4HP061PH
AG4HP081PH
AG4HP101PH
AG4HP121PH
AG4HP141PH
AG4HP161PH
AG4HP103PH
AG4HP123PH
AG4HP143PH
AG4HP163PH
Thank you for choosing an Argoclima heat pump. Please read this manual carefully before using the unit and
retain it for future reference.
Rev.01-09/22

Summary

Diagram of the Operating Principle

Radiant floor heating and DHW with 3-way valve and tank

Heating and cooling with fan coils and DHW with 3-way valve and tank

Radiant floor heating with single thermal zone and DHW with 3-way valve and tank

Operating Principle of the Unit

Main Components

Installation Guideline of Monobloc Unit

8.1 Instruction to Installation

Instructions for unit installation according to national and local safety codes.

8.2 Installation of monobloc unit

Installation of Hydraulic Unit

Remote Air Temperature Sensor

Thermostat

Control Panel

Charging and Discharging of Refrigerant

Installation of Insulated Water Tank

Electric wiring work

Wring Diagram

Electric wiring

20.2.1 Wiring principle

Commissioning

21.1 Check before startup

Procedures for checking the unit before starting the commissioning process.

Test run

Daily Operation and Maintenance

Recovery

Decommissioning

Disassembly of the unit

Argo AG4HP163PH Specifications

General

Rated Input Power (Heating)	4.5 kW
Sound Power Level (Outdoor Unit)	62 dB(A)
Refrigerant	R32
Operating Temperature Range (Heating)	-15°C to 24°C
Operating Temperature Range (Cooling)	-5°C to 46°C