Do you have a question about the Argo AQUA UNIT AUAH and is the answer not in the manual?
Refrigerant | R32 |
---|---|
Type | Air to Water |
Power Supply | 220-240V, 50Hz |
Energy Efficiency Class (Cooling) | A+ |
Noise Level (Indoor Unit) | 25 dB(A) |
Dimensions (Outdoor Unit) | Varies depending on the model |
Weight (Indoor Unit) | Varies depending on the model |
Weight (Outdoor Unit) | Varies depending on the model |
Key advice for safe installation and trouble-free operation of the unit.
Details on water system pressure, temperature, volume, and operating limits.
Identification and description of the unit's internal and external components.
List of accessories that come with the unit for installation and operation.
Guidelines for choosing a suitable and safe location for unit installation.
Steps for mounting the unit on a wall or floor.
Instructions for installing the unit on an Emix Tank V2.
Specifications for connecting the refrigerant circuit, including pipe sizes and lengths.
Procedures for connecting water lines and the safety valve.
Explanation of symbols used in the system wiring diagrams.
Diagram for single thermal zone heating with DHW and backup heating.
Essential checks for hydraulic, refrigerant, and electrical systems before initial operation.
Configuration of jumpers and switches on the main board for unit operation.
Overview of the control panel and display for system parameterisation.
Procedures for testing circulation pump and water flow using the control panel interface.
Procedure for setting pump speed based on application and rated capacity.
Method to determine system pressure losses using pump curves and unit specifications.
Recommended annual maintenance tasks for optimal unit performance and longevity.
Guidelines for servicing the refrigerating circuit and part replacement.
Key for understanding electrical diagram symbols and wire color coding.
Table detailing error codes, LED status, and their corresponding descriptions for diagnosis.