Need help?Do you have a question about the Argo AGHP081PH and is the answer not in the manual?
General| Voltage | 220-240V |
|---|---|
| Refrigerant | R410A |
| Cooling Capacity | 8000 BTU |
| Noise Level (Outdoor) | 52 dB |
| Weight (Outdoor Unit) | 28 kg |
| Heating Capacity | 8500 BTU/h |
Contains general instructions and disclaimers regarding manual usage and product updates.
Provides information on the correct disposal of the product according to European directive.
Outlines essential safety measures for installing and handling the control unit.
Details the procedure for correct product disposal according to WEEE directive.
Describes the main menu interface and its components.
Explains how to configure the display backlight for energy saving or constant illumination.
Details how to turn the unit on and off using the control panel.
Introduces the process for accessing and modifying various operational functions.
Explains how to select the operating mode of the heat pump unit.
Describes the setup for the fast hot water feature.
Details the settings for combined cooling and hot water operations.
Details the settings for combined heating and hot water operations.
Explains how to activate and configure the quiet operation mode.
Describes how to set the unit to adapt operation based on weather conditions.
Guides on setting up a weekly schedule for unit operation.
Explains how to manage operation during holiday periods.
Details the process for setting up a disinfection cycle for the unit.
Describes how to set a timer for specific operation periods.
Explains how to schedule temperature changes over time.
Outlines how to activate and use the emergency operating mode.
Explains the settings for operating the unit during extended absences.
Guides on setting predefined operational modes and schedules.
Details how to reset and clear errors from the control panel.
Explains how to reset the unit's Wi-Fi connection.
Describes how to reset all user parameter settings to default.
Explains how to access and adjust user-defined operational parameters.
Configures the control state for sensors and operation modes.
Sets the operational status of the 2-way valve for different modes.
Configures settings related to solar heating integration.
Manages settings related to the unit's water tank functionality.
Adjusts thermostat settings for controlling the unit based on room or water temperature.
Configures settings for an auxiliary thermal source.
Sets up the optional electric heater functionality.
Configures the use of an external remote sensor.
Manages settings for the air removal function.
Configures parameters for floor heating debugging.
Explains how to manually initiate the defrost cycle.
Details how to operate the unit in forced cooling or heating modes.
Configures settings related to card control access.
Sets a limit for the operating current of the unit.
Sets the network address for centralized control system integration.
Describes the process for refrigerant recovery operations.
Configures the control logic for the water tank heater.
Provides an overview of commissioning parameters and their settings.
Displays the current operational status of various unit components.
Allows viewing of detailed operational parameters of the unit.
Displays a list of current and historical error codes.
Provides access to a log of past error records and their occurrences.
Shows the program and protocol versions of the unit's software.
Guides on setting the unit's clock and date.
Instructions for downloading and installing the Ewpe Smart mobile application.
Details how to set main functions like mode and temperature using the app.
Explains how to configure additional functions through the mobile app.
Guides on managing family accounts and device access within the app.
Information on accessing help and guides within the mobile application.
Instructions for submitting feedback or reports through the mobile application.
To Next Page