60
V 09/22
2. Delete an AC under control
For Android: Click “Delete Device” button under “Modify the name” in Fig.5.
For IOS: Swipe over the AC name to the left under “Device List” and click “Delete”.
3. Remote control with wireless router
Once the wireless router is connected to the Internet, activating the GPRS on the mobile terminal will enable the remote
control of the devices.
The software provides help service through which the users may check the operational instructions of the software and
other information.
Besides, as the operation interface and the function of the software is under constant improvement, we will keep you
informed about the subsequent upgrades for your updating.
As the operation interface may change due to the constant version upgrading, the figures in this manual are for
reference only, so please rely on the actual operation interface.
APPENDIX “A”: CONFIG FAILED CHECK ITEMS
1. Please check the Wi-Fi icon on the air conditioner panel, if the icon not display, please contact customer service.
2. Please make sure the mobile phone network under the current router WI-FI environment: Close the mobile phone
3G/4G data connection, to be connected to the router WI-FI pairing.
3. Please check whether the module is reset successfully. For details, see “Reset AC WI-FI module”.
4. Please check the Wi-Fi name of the router, recommended not contain spaces and other non-alphanumeric characters.
5. Please check the Wi-Fi password of the router, not allowed more than 32 bits, recommended not contain spaces and
special symbols in addition to letters and numbers.
6. Please check whether the Wi-Fi password input is correct when APP configuration: you can check show password to
confirm when input the WI-FI password.
To Next Page
Loading...
Need help?
General
