34V 01/23
WARNING!
Before carrying out any cleaning or maintenance operations, unplug the appliance.
1. Cleaning the side air lter
The air lter must be checked at least once every two weeks. Operation
with dirty or clogged lters always causes a reduction in the efciency of the
air conditioner and can cause serious problems. To remove the side lter,
remove the grille by holding it on both sides and pulling it towards you; Use
a vacuum cleaner to remove dust from the lter. If this is not enough, wash the
lter with warm water and possibly neutral detergent, rinse it with cold water
and let it dry naturally before putting it back in its place.
ATTENTION:
The unit is equipped with two other lters in the back, protected by grilles
closed with a screw. For safety reasons, it is recommended not to remove
the screw that blocks the two grilles: clean the two lters from the outside,
using a vacuum cleaner.
2. Cleaning of casing
Use a damp and soft cloth to clean the outer surface of the appliance.
Do not use excessively hot water, solvents, petrol or other aggressive chemical compounds, talcum powder or
brushes: these may damage the surface or colour of the casing. Remove any stains using lukewarm water with
a little neutral detergent. Do not pour water onto the air conditioner to clean it, as this may damage its internal
components or cause a short-circuit.
3. Storage
When the air conditioner is not expected to be used for a long time, clean the lters before storing it away. Keep
the appliance in a vertical position at all times. Do not place heavy objects on top of the air conditioner. It is
advisable to protect the appliance with a plastic sheet.
WI-FI CONNECTION GUIDE:
1. Search “Tuya Smart” in App Store (for iOS) or Google Play (for Android), download the “Tuya Smart” application
on your smartphone. Register or log into your account on Tuya.
2. Make sure the device is in standby. Long press the mode button until you hear a beep. The Wi-Fi led will ash
rapidly.
3. Press the “+” button on the top right or the “Add device” button on the Tuya home page to add your air conditioner.
4. Select the “Portable air conditioner” category. You will be prompted to use the 2.4ghz wi- network. 5ghz wi-
is not supported.
5. Enter the Wi-Fi password and connect to the Wi-Fi. Make sure the wi indicator light is ashing quickly, then press
Next”. The application will scan and add the device.
6. When the appliance has been added successfully, the WIFI indicator light on the control panel will light up
again.
7. It will then be possible to use the APP to control the functions of the appliance.
CARE AND MAINTENANCE
WIFI GUIDE
To Next Page
Loading...
Need help?
General
