25V 02/23
• Before moving or cleaning the device, ensure that it is unplugged from
the socket.
• Do not move the air conditioner while it is operating; rst turn the appliance
off, check for any condensate build-up and empty it if necessary.
• To turn the appliance off, set the remote control to OFF and remove the
plug from the socket. Pull on the plug only. Do not pull the cord.
• Do not use the appliance if the cord or plug are damaged. If the power
supply cord is damaged, it must be replaced by the manufacturer,
dealer or a similarly qualied person so as to avoid any safety risks.
• Keep the unit away from re, possible re sources, inammable or
explosive objects.
• Do not leave the unit unattended while it’s operating, turn the unit off
and unplug it.
• If drainage hose is used, the ambient temperature musnt’t be lower than
0 °C. It can cause water leakage to the air conditioner.
• Do not splash or pour water on the air conditioner
PRECAUTION!
• Do not insert any objects into the air conditioner: this is very dangerous
as the fan turns at high speed.
• Ensure that air circulates freely around the unit. Do not cover the air
intake and delivery grilles with drapes or any other means.
WARNING!
• The air conditioner must be positioned at least 50 cm from the wall or
any other obstacles, on a at and stable surface so as to avoid water
leaks.
• The air conditioner is tted with a system for protecting the compressor
from overload. This means that the compressor only starts 3 minutes
after its previous stoppage.
• Please wait at least 3 minutes before starting the unit. This helps prevent
the compressor from being damaged.
WARNING!
In the event of an anomaly, switch the appliance off and unplug it from
the socket. Do not dismantle or attempt to repair or modify the product.
To Next Page
Loading...
Need help?
General
