To Next Page

To Previous Page

V 12/16

FOR OPTIMAL REMOTE CONTROL OPERATION, POINT THE TRANSMITTER HEAD TOWARDS THE

RECEIVER ON THE AIR CONDITIONER.

1. ON/OFF BUTTON

2. TIMER BUTTON

3. DOWN BUTTON

4. MODE BUTTON

5. UP BUTTON

6. FAN BUTTON

7. SLEEP BUTTON

(1) ON/OFF BUTTON

Press this button to switch the unit on or off.

(2) TIMER BUTTON

a. When the air conditioner is off, press “TIMER” to set when to switch the unit on. Press “+” o “–“ to set the time, and press

“TIMER” again to confirm.

b. When the air conditioner is on, press “TIMER” to set when to switch the unit off. Press “+” o “–“ to set the time, and press

“TIMER” again to confirm.

c. After setting the time, press “TIMER” to cancel the time setting.

(3) DOWN BUTTON

Press this button to adjust the temperature and set the time.

(4) MODE BUTTON

When the unit is on, press this button to choose the desired mode among: COOLING, FAN and DEHUMIDIFYING.

(5) UP BUTTON

Press this button to adjust the temperature and set the time.

(6) FAN BUTTON

In the cooling and fan modes, press this button to adjust the ventilation speed to low (Low) or high (High). In certain

conditions, the fan speed may not function according to the settings.

In dehumidifying mode, this button cannot be pressed, thus the fan will forcefully choose the low fan speed.

Argo SWAN User Manual

Questions and Answers: