20
V 12/16
5. Avoid tight bends or folds in the flexible pipe.
USE WITH WINDOW UNIT KIT
1. Make a hole having a diameter of roughly 133
mm on the glass window.
2. Insert the window unit into the window.
3. Insert the round fitting into the retractable flexible
pipe and insert the latter with its round fitting into
the window unit without the plug.
4. Insert the round fitting onto the flexible pipe.
5. Insert the flexible pipe thus mounted into the rear of the
air conditioner.
If the air conditioner is not used for prolonged periods, disconnect the pipe and plug the window unit.
Connect the power cord to a suitable electric socket (220-240V). Insert the supplied batteries into the remote control and
make sure the poles match. Select the desired operating mode from the remote control.
To Next Page
Loading...
Need help?
General
