Need help?Do you have a question about the Argon 18 GALLIUM and is the answer not in the manual?
General| Type | Road bike |
|---|---|
| Frame size | - \ |
| Brake system | - |
| Frame design | Sideways |
| Gearing type | Chain |
| Luggage rack | No |
| Chain housing | Open |
| Product color | Black, White |
| Frame material | Carbon |
| Adjustable stem | Yes |
| Chain gear type | Derailleur |
| Target audience | Adults |
| Number of wheels | 2 wheel(s) |
| Bicycle suspension | Front fork, Seatpost |
| Bicycle brake control | Handbrake |
Weight and Dimensions| Weight | - g |
|---|
Lists components installed on the frame and their specifications.
Instructions for installing the 3D headset, offering adjustable heights.
Install front/rear derailleur and brake cables, measure housing length for proper rotation.
Route rear brake cable, remove stoppers, measure housing to avoid rider interference.
Route derailleur cables through downtube and bottom bracket cable guide.
Use brake cable/metal end trick for routing; find more info on Shimano's site.
Use proper downtube/front derailleur grommets and rear derailleur cable stoppers for Di2.
Install Di2 battery in seatpost using holders and a small amount of grease.
Install saddle on rocker, tighten rail clamp screws, maintain gap between parts.
Adjust saddle angle, offset, and finalize rail clamp tightening.
Adjust front derailleur hanger angle for equal curve with big chain ring; use Loctite and torque.
Lists frameset parts and seat post components with supplier details.
Details specific parts installed on the frame, like hangers and cable guides.
Lists Di2 specific parts and components shipped separately with the frameset.
To Next Page